| Nombor Bahagian | NE133QUB-N01 |
| Jenama | BOE |
| Saiz | 13.3 |
| Permohonan | 3D Printer |
| Resolusi | 38403×2160 |
| Komposisi | CELL , Oxide TFT-L |
| Kecerahan | |
| CR | - |
| Warna | Grayscale |
| Lampu latar | No |
| Antara muka | eDP |
| pengilang | BOE |
| nama model | NE133QUB-N01 (BOE093B) |
| saiz skrin | 13.3 inch |
| jenis skrin | CELL , Oxide TFT-LCD |
| nombor piksel | 3840(3)×2160 (UHD) 332PPI |
| susunan | LCR Vertical Stripe |
| kawasan aktif (mm) | 293.76 × 165.24 (H×V) |
| garis besar (mm) | 297.76 × 173.04 × 1.25 (H×V×D) |
| kawasan bezel (mm) | - |
| rawatan | Antiglare (Haze 25%), Hard coating (3H) |
| kecerahan | 0 cd/m² |
| nisbah kontras | - |
| sudut pandangan | 85/85/85/85 (Typ.)(CR≥10) |
| tindak balas | 25 (Typ.)(Tr+Td) ms |
| pandangan yang baik di | Symmetry |
| mod kerja | ADS, Normally Black, Transmissive |
| ketebalan kaca | 0.50+0.50 mm |
| ketransmisian | - |
| kedalaman warna | Grayscale |
| lampu latar | No B/L |
| jisim | 167g (Max.) |
| digunakan untuk | 3D Printer |
| kadar segar semula | 60Hz |
| skrin sentuh | Without |
| senarai ic pemandu | Built-in COG 6 source chips |
| jenis isyarat | eDP (4 Lanes) , eDP1.3 , HBR2 (5.4G/lane) , 40 pins Connector |
| bekalan voltan | 3.3V (Typ.) |
| maks. penilaian | Storage Temp.: -20 ~ 60 °C Operating Temp.: 0 ~ 50 °C |
| B133HAN02.0 | AUO | 13.3 | 1920×1080 |
| B133XW01 V0 | AUO | 13.3 | 1366×768 |
| B133XW04 V0 | AUO | 13.3 | 1366×768 |
| G133I1-L01 | Innolux | 13.3 | 1280×800 |
| L5F30812P00 | Epson | 13.3 | 1024×768 |
| LP133WH1-TLB1 | LG Display | 13.3 | 1366×768 |
| LP133WH2-TLB2 | LG Display | 13.3 | 1366×768 |
| LP133X09-A2 | LG Display | 13.3 | 1024×768 |
| LQ13X32 | SHARP | 13.3 | 1024×768 |
| N133I7-L01 | Innolux | 13.3 | 1280×800 |